Product Applications: drinking pure water, sterile water for pharmaceutical, equipment, water, oil field water injection wells, industrial water, high temperature water, fruit juice beverage alcohol, fuel oil, acid and alkali corrosive fluids, paint, chemical solvents, slurry liquid, glue, ink, imaging with a liquid such as liquid lead and terminal filter media, non-standard can be customized. 
 Automatic self-cleaning filter features / performance: 
 1. Net-automatic self-cleaning filter maximum working pressure: 2.5 Mpa 
 Minimum working pressure: 0.25MPa 
 2. Net-automatic self-cleaning filter maximum working temperature: 95 ℃ 
 3. Optional stainless steel mesh or other alloy steel shell material, inner and outer surface corrosion spray 
 4. If the coarse dirt more, the optional auxiliary high-pressure backwash pump structure, self-cleaning coarse filter with anti-net-structure of the filter flushing 
 5. Optional automatic self-cleaning filter and hydraulic PLC controller 

 6. Automatic self-cleaning function: vertical self-cleaning filters is the use of the water supply system itself, by internal pressure to clean the filter, without any external energy; 
 7. Uninterrupted water supply: water back flush the system continuously. The minimal amount of backwash water is filtered out of water to 1%; 
 8. Accurate filtration: filtering accuracy can be selected at 30μm ~ 3000μm; 
 9. Net-self-cleaning filter pressure loss: Because the filter area than other types of filters, so the pressure loss is relatively small; 
 10. Backwash reliable: a variety of control modes, manual, pressure, time, PLC control options; 
 11. Install the economy is simple: the structure in various forms, various conditions for field installation, maintenance simple, reliable operation. 


 Automatic self-cleaning filter products feature: 
 Automatic self-cleaning filter has to filter the raw water and sewage automatic filter cleaning function, and when cleaning the sewage system of continuous water supply. 
 Automatic self-cleaning filter cleaning, there are two control modes: automatic control and manual control. 
 Automatic control: automatic control with timing and pressure both ways. Time to set the timer in the filter filtration time, when the filtration time to start the sewage, the sewage discharge time from the timer setting time; real-time control system while the system pressure and the pressure set by the user compared to when the system pressure When the set pressure differential, filter and cleaning the sewage, the sewage discharge time to time from the timer setting. Discharge time, stop cleaning, the system returns to its initial state, in order to prepare for the next filtering process. 
 Manual control: the control panel manual / auto select switch to manual position, filters for sewage. 
 Users may need to select two control modes, see the back of the operation of the specific part of the operation. 

 . 

 Maintenance of filtration equipment: 
 ◇ long-term without the need to clean the filter, remove the filter, wash, dry, kept sealed in plastic bags do not pollute, filters wipe store, not damaged. 
 . 
 ◇ change filter down to soak in the acid lotion, the soaking time should not exceed 24 hours, usually in acid-base liquid temperature 25 ℃ -50 ℃. Recommended ratio of acid or alkaline water 10-20% of the time as well. Higher protein content of the filtrate, the filter is best to use enzyme solution soaking, cleaning effect, updated re-use, must be cleaned and then steam sterilized. 

 ◇ filter sterilization should be careful to take the time and temperature, polypropylene at high temperature to 121 ℃ appropriate disinfection cabinet, steam sterilized under the 0.1MPa steam pressure to 130 ℃ / 20 minutes is appropriate, polysulfone and Teflon ethylene steam sterilization, can reach 142 ℃, pressure of 0.2MPa, 30 minutes is appropriate, if the temperature is too high for too long, too much pressure can damage the filter.