Technical parameters of automatic sewage filter 

 Automatic sewage filter flow range: 4 ~ 20000 m3 / h 
 Automatic sewage filter filtration precision: 100 ~ 3000 μm 
 Automatic sewage filter working pressure: 0.1 ~ 1.0 Mpa 
 Automatic sewage filter pressure loss: ≤ 0.016 Mpa 
 Automatic sewage filter drain valve diameter: DN 50 mm 
 Sewage: 10 ~ 60 seconds 
 Suitable temperature: ≤ 95 ° C 
 Power: AC Three-phase 380V / 50Hz 
 Control Interface: Digital, knobs, switches, 

 Automatic sewage filter equipment safety and maintenance operations Profile 
 1. In the installation, operation before the filter, carefully read the installation instructions. 
 2. Repairs before the filter to drain the water .. 
 3. In raise, transport or install filters, please take precautions. 
 4. Filter must be fixed to avoid the water jet to other parts of the filter, in particular, the electronic control unit. 
 5. To ensure that the total weight of the filter support structure meet the requirements. 
 6. Before installation, make sure that the filter pipe pressure shall comply with the work pressure. 
 7. Installation, use standard flanges and joints. 
 8. Ensure that all appropriate filter flange bolts have been tightened. 
 9. Maintenance of the filter, use the original accessories. 

 Automatic sewage filter applications: 

 Automatic sewage filter applications: 
 Metallurgy: continuous casting of water, high pressure water removal, the net by water, turbid circulating water filtration, cooling water, the whole filter, next to the filter, nozzle protection 
 Application of automatic sewage filter power: turbine cooling water filter, gray water recycling filtration, dust nozzle protection, cooling tower water filter and next to the filter so the whole 
 Application of automatic sewage filter raw water: lakes, rivers, reservoirs of water, well water, rainwater, groundwater extraction when the sand, algae, organic filters, etc. 
 Application of automatic sewage filter Agriculture: irrigation, drip irrigation water treatment 
 Other automatic sewage filter applications: construction, steel, petroleum, chemicals, electronics, power generation, textile, paper, food, sugar, pharmaceuticals, plastics, automotive industry, etc. 

 Automatic sewage filter widely used in drinking water treatment, construction recycling water treatment, industrial circulating water treatment, sewage treatment, mining, water treatment, water treatment and other areas of golf courses. 


 Automatic sewage filter equipment maintenance methods: 
 ◇ long-term without the need to clean the filter, remove the filter, wash, dry, kept sealed in plastic bags do not pollute, filters wipe store, not damaged. 
 . 
 ◇ change filter down to soak in the acid lotion, the soaking time should not exceed 24 hours, usually in acid-base liquid temperature 25 ℃ -50 ℃. Recommended ratio of acid or alkaline water 10-20% of the time as well. Higher protein content of the filtrate, the filter is best to use enzyme solution soaking, cleaning effect, updated re-use, must be cleaned and then steam sterilized. 

 ◇ filter sterilization should be careful to take the time and temperature, polypropylene at high temperature to 121 ℃ appropriate disinfection cabinet, steam sterilized under the 0.1MPa steam pressure to 130 ℃ / 20 minutes is appropriate, polysulfone and Teflon ethylene steam sterilization, can reach 142 ℃, pressure of 0.2MPa, 30 minutes is appropriate, if the temperature is too high for too long, too much pressure can damage the filter.